Proper insulation of the house, namely his gender, always causes increased, attention as from the future homeowner and builders. The point is that through the floor there is an intensive heat exchange.
When performing work, the builders are insulated with the basement so that the temperature near the floor is either equal to room, or in the worst case may differ by 2-3 degrees Celsius. To carry out insulation work, a carpentry tool, sheets of roofing material, bars with a cross section of 2-3 mm will be required. To check the quality of work performed, a construction level is required.
Floor insulation work is carried out in three stages. At the first stage, work with the draft floor is performed. At the second stage, waterproofing is performed, at the final stage, a final flooring is formed. You can use slag -containing slabs or mats as a material for thermal insulation. Before starting work, it is necessary to check the correct placement of the lags in the horizontal plane. In case of detection of deviations, then they must be leveled.
The composition of insulation works also includes an operation to protect the floor from rodents, which adapted to equip their holes in it. To do this, lay a special net, which prevents the efforts of these small pests. After laying this grid, granular slag is packed up. The black floor is installed on top of the poured slag. After that, the heat insulator is laid from mats or plates.
On the final segment of the work, the finishing of the finish is laid. All the remaining free space must be filled with a pre -prepared mixture of slag and lime, which is mixed in a ratio of 1 part of the lime for 9 parts of slag. Such a mixture can guarantee the absence of rodents.
Wood processing equipment: Weinmann, Schelling and Schelling machines allow you to achieve the best results when processing wooden materials. Thanks to machines of this type, decorative MDF of very good quality is made, which can be bought inexpensively.