Wooden buildings have always been a habitat for different microorganisms. The largest harm to the wood structure, like a person, bring spore fungi. They are easily tolerated by air through. They also multiply very quickly, and for their rapid growth, high humidity and warm.
Such conditions are created in insufficiently ventilated rooms. In the future, t.e. During the operation of the room, getting rid of foci of fungal infections will be quite difficult. Therefore, measures should be taken to prevent the appearance of these foci at the stage of storage of lumber and the construction of buildings.
There are two methods of protecting wood from mold and fungus: mechanical and chemical. Next, consider each of these methods.
one. The method of mechanical protection is based on the prevention of the ability to take root on wood materials.
For effective protection, it is:
Create good conditions for ventilation of log house and other materials.
Storing a beam and boards, you should make a gap between the rows. This is easily realized by laying between rows of small bars.
The entire lumber must be provided with direct sunlight by getting on it. Their effect kills spores of fungi.
It must be remembered that after the installation of the log house on the foundation, you should not create isolation inside the building. She must freely ventilate. If you have a construction company, then you may need to enter the SRO in construction.
2. Chemical protection is carried out by the coating of wood materials with special protective equipment. The effect of these products depends on how the wood was saturated. Therefore, processing is carried out several times and at different stages. First, processing is carried out during the manufacture of the material. Further, before construction, processing is repeated. And the last time the wood is covered before finishing. It should be remembered that at the end of each stage of processing, it is necessary to carefully ventilate the wood.